Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 38 (REAR SUSPENSION SYSTEM)TORQUE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Torque Specifications
2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Torque Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Hose Bracket Bolt | 27 N.m | 20 Ft. Lbs. |
| Rear Spindle Rods-To-Knuckle Nut | 150 N.m | 110 Ft. Lbs. |
| Rear Suspension Strut Shaft Nut | 75 N.m | 55 Ft. Lbs. |
| Rear Suspension Support Mounting Bolt | 110 N.m | 81 Ft. Lbs. |
| Rear Wheel Hub-To-Knuckle Bolts | 75 N.m | 55 Ft. Lbs. |
| Rear Wheel Spindle Rods-To-Rear Suspension Support Nut | 140 N.m | 103 Ft. Lbs. |
| Stabilizer Shaft Insulator Bracket Nuts | 48 N.m | 35 Ft. Lbs. |
| Stabilizer Shaft Link Nuts | 52 N.m | 38 Ft. Lbs. |
| Strut Mount-To-Body Nuts | 45 N.m | 33 Ft. Lbs. |
| Strut-To-Knuckle Nuts | 120 N.m | 89 Ft. Lbs. |
| Trailing Arm Bolt-To-Body Bracket Bolt | 50 N.m | 37 Ft. Lbs. |
| Trailing Arm-To-Knuckle Bolt | 70 N.m + 65° | 52 Ft. Lbs. + 65° |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.