Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 33 (HVAC SYSTEMS - MANUAL)SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Section 33 (HVAC Systems - Manual): Specifications
2004 Oldsmobile Bravada AWDSECTION Specifications
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Vehicle is equipped with Supplemental Inflatable Restraint (SIR) system. When servicing vehicle, use care to avoid accidental air bag deployment. SIR system-related components are located in various locations throughout interior and exterior of vehicle, depending on application. Do not use electrical test equipment on or near these circuits. If necessary, deactivate SIR system before servicing components. See appropriate AIR BAG RESTRAINT SYSTEMS article in RESTRAINTS.
SPECIFICATIONS
| Application | Specification | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Compressor Type | Delphi V5 5-Cyl. | |||||||||
| Compressor Belt Tension | (1) | |||||||||
| System Oil Capacity (2) | 9 ozs. | |||||||||
| Oil Added With Component Replacement (3) | ||||||||||
| Condenser | 1 oz. (30 ml) | |||||||||
| Evaporator | 3 oz. (90 ml) | |||||||||
| Refrigerant (R-134a) Capacity | 2.25 Lbs. | |||||||||
| System Operating Pressures (4) | ||||||||||
| High Side | 155-212 psi (10.9-14.9 kg/cm2 ) | |||||||||
| Low Side | 32-46 psi (2.24-3.23 kg/cm2 ) | |||||||||
|
||||||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.