Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Without Scan Tool
2004 Oldsmobile Bravada AWDSECTION Without Scan Tool
WARNING: This page is about a different car, the 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2001 Chevrolet Monte Carlo, and 2001 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch to ACC or RUN position. Turn radio off.
- Press and hold DISP button on radio for at least 10 seconds until SETTINGS is displayed.
- Press SEEK up and down arrows until AUTOLOCK appears on display.
- Press PREV or NEXT buttons to scroll through options under AUTOLOCK. An asterisk will appear next to current setting.
- To change option, display desired option and press DISP button. See AUTOMATIC DOOR LOCK/UNLOCK MODES table. A chime will sound to verify new setting.
- To exit, press PREV or NEXT buttons to scroll until EXIT is displayed and press DISP button. A chime will sound to verify exit.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.