Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
With Scan Tool
2004 Oldsmobile Bravada AWDSECTION With Scan Tool
WARNING: This page is about a different car, the 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2001 Chevrolet Monte Carlo, and 2001 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Connect scan tool. Turn ignition switch to RUN position. Select correct vehicle and model year. At SELECT SYSTEM screen, select BODY.
- At APPLICATION MENU screen, select PERSONALIZATION.
- At next APPLICATION MENU screen, select SET OPTIONS.
- At SET OPTIONS screen, select F1 (automatic door lock mode).
- At next APPLICATION MENU screen, select or highlight current mode and press ENTER to turn current mode off.
- Select or highlight desired mode. See AUTOMATIC DOOR LOCK/UNLOCK MODES table.
- Press ENTER to select desired mode. Select SAVE OPTIONS. Exit the menu.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.