Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 293 (ELECTRICAL COMPONENT LOCATOR)SWITCHES
2004 Oldsmobile Bravada AWD
Section 293 (Electrical Component Locator): Switches
2004 Oldsmobile Bravada AWDSECTION Switches
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
SWITCHES LOCATION
| Component | Location |
|---|---|
| A/C Low Pressure Switch | On right side of accumulator. See Figure. |
| Automatic Transmission Fluid Pressure Manual Valve Position Switch | In automatic transmission. |
| Brake Fluid Level Switch | On left side of brake fluid reservoir. |
| Brake Pressure Differential Switch | Mounted to power brake booster, below master cylinder. |
| Coolant Level Switch | In coolant reservoir. |
| Engine Oil Level Switch | On lower right side of oil pan. |
| Park Brake Switch | Part of park brake assembly. |
| Park/Neutral Position Switch | On left side of transmission. |
| Stoplamp Switch | On top of brake pedal bracket. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.