Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 293 (ELECTRICAL COMPONENT LOCATOR)CONNECTORS
2004 Oldsmobile Bravada AWD
Section 293 (Electrical Component Locator): Connectors
2004 Oldsmobile Bravada AWDSECTION Connectors
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTORS LOCATION
| Component | Location |
|---|---|
| C100 (Black, 16 Pin) | Below underhood fuse block. |
| C102 (Black, 10 Pin) | Near underhood fuse block. |
| C104 (Black, 12 Pin) | At front side of underhood fuse block. |
| C114 (Black, 10 Pin) | At front side of underhood fuse block. |
| C115 (Black, 24 Pin) | Behind underhood fuse block. |
| C125 (Light Gray, 8 Pin) | On radiator support. |
| C127 (Light Gray, 8 Pin) | On radiator support. |
| C148 (Light Gray, 8 Pin) | On top left side of engine. |
| C149 (Light Gray, 8 Pin) | On top right side of engine. |
| C150 (Black, 4 Pin) | On left inner fender. |
| C151 (Black, 12 Pin) | Behind underhood fuse block. |
| C152 (Natural, 12 Pin) | Below underhood fuse block. |
| C153 (Black, 3 Pin) | Attached to underhood fuse block mounting bracket. |
| C154 (Black, 3 Pin) | Near underhood fuse block. |
| C155 (Black, 10 Pin) | Near left top front of engine. |
| C198 (Black, 1 Pin) | Near underhood fuse block. |
| C201 (Black, 32 Pin) | On steering column. |
| C202 (Black, 18 Pin) | Behind top of dash. |
| C203 (Black, 3 Pin) | Near left I/P fuse block. |
| C206 (Light Gray, 22 Pin) | Behind left kick panel. |
| C209 (Black, 16 Pin) | Behind left kick panel. |
| C210 (Black, 2 Pin) | Brake/clutch jumper harness to SEO jumper harness. |
| C214 (Black, 16 Pin) | Behind upper left side of dash. |
| C220 (Black, 24 Pin) | Behind center of dash. |
| C221 (Yellow, 4 Pin) | Behind left kick panel. |
| C222 (Yellow, 4 Pin) | Behind right kick panel. |
| C249 (Black, 4 Pin) | Behind center of dash. |
| C250 (Gray, 6 Pin) | Behind left side of dash. |
| C305 (Black, 16 Pin) | Under left front seat. |
| C306 (Black, 40 Pin) | Under front floor console. |
| C310 (Natural, 17 Pin) | Behind left "B" pillar trim panel. |
| C312 (Blue, 8 Pin) | In right rear of vehicle. |
| C313 (Black, 3 Pin) | Behind left kick panel. |
| C315 (Black, 3 Pin) | Behind left kick panel. |
| C320 (Gray, 13 Pin) | Under left front seat. |
| C321 (Light Blue, 24 Pin) | Under left front seat. |
| C322 (Natural, 10 Pin) | Under left front seat. |
| C323 (Black, 6 Pin) | Under left front seat. |
| C324 (Black, 8 Pin) | Under left front seat. |
| C325 (Gray, 6 Pin) | Under left front seat. |
| C326 (Gray, 6 Pin) | Under right front seat. |
| C329 (Black, 4 Pin) | Under right front seat. |
| C350 (Black, 2 Pin) | At top of transfer case. |
| C370 (Black, 14 Pin) | Below center console. |
| C388 (Black, 6 Pin) | Under right front seat. |
| C390 (Black, 4 Pin) | Body harness to center sail harness. |
| C396 (Natural, 17 Pin) | Behind right "B" pillar trim panel. |
| C397 (Black, 6 Pin) | Behind right rear quarter panel. |
| C399 (Black, 16 Pin) | Under right front seat. |
| C402 (Gray, 7 Pin) | Near left rear frame rail. |
| C410 (Black, 2 Pin) | At right rear of vehicle. |
| C411 (Black, 2 Pin) | At left rear of vehicle. |
| C450 (Black, 38 Pin) | At right rear of vehicle. |
| C499 (Gray, 12 Pin) | Behind right quarter panel, near "D" pillar. |
| C900 (Black, 3 Pin) | In rear liftgate. |
| C901 (Black, 8 Pin) | In rear liftgate. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.