SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 285 (DOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
Torque Specifications

Application Specification
Metric English
Armrest Pull Cup Screws 2 N.m 18 lb in
Armrest Screws 3.5 N.m 31 lb in
Body Side Upper and Lower Hinge Bolts 33 N.m 24 lb ft
Cone Adjuster Body Side Hinge Bolts 10 N.m 89 lb in
Door Armrest Bracket Screws 18 N.m 89 lb in
Door Lock Screws 10 N.m 89 lb in
Door Lock Striker Screws 25 N.m 18 lb ft
Door Side Upper and Lower Hinge Bolts 33 N.m 24 lb ft
Door Stationary Window Molding Screws 2 N.m 18 lb in
Door Window Weatherstrip Bolts 10 N.m 89 lb in
Door Window Weatherstrip Retainer Screws 2 N.m 18 lb in
Electric Mirror Motor Screws 10 N.m 89 lb in
Front Door Lock Actuator Screws 2 N.m 18 lb in
Inner Trim Panel Screws 2 N.m 18 lb in
Inside Door Handle Bezel Screw 2 N.m 18 lb in
Intermediate Door Hinge Bolts 33 N.m 24 lb ft
Outer Belt Sealing Strip Machine Screw 1.5 N.m 13 lb in
Outer Belt Sealing Strip Self-Tapping Screw 1.5 N.m 13 lb in
Outer Energy Absorber Pad Screws 2 N.m 18 lb in
Outside Door Handle Bolts 10 N.m 89 lb in
Outside Mirror Nuts 10 N.m 89 lb in
Radio Speaker Screws 2 N.m 18 lb in
Rear Door Lock Actuator Screws 2 N.m 18 lb in
Stationary Window Bolt 10 N.m 89 lb in
Stationary Window Screws 2 N.m 18 lb in
TORX Head Body Side Upper and Lower Hinge Bolt 10 N.m 89 lb in
Upper Seat Belt Guide Loop Attachment Nut 43 N.m 31 lb ft
Window Regulator Bolts 10 N.m 89 lb in
Window to Regulator Bolts 10 N.m 89 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.