Torque Specifications

2004 Oldsmobile Bravada AWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Cooler Pipe Flare Nuts 26 (35)
Transaxle Pan Drain Plug 36 (49)
INCH Lbs. (N.m) 
ATF Temperature Sensor Bolt 97 (11)
Battery Tray Retaining Bolts 115 (13)
Filler Tube Bracket Bolt 44 (5)
Heat Shield Bolts 44 (5)
Manual Lever Nut 80 (12)
Manual Selector Bolts 80 (12)
Manual Shaft Nut 49 (5.5)
Oil Cooler Pipe Bracket Bolt 44 (5)
Oil Filter Screen 97 (11)
Oil Pan Bolts 71 (8)
Park/Neutral Position Switch Bolts 49 (5.5)
Shift Cable Retaining Nut 80 (12)
Shift Select Cable Bolts 44 (5)
Solenoids 97 (11)
Valve Body Bolts 97 (11)
Vehicle Speed Sensor Bolt 53 (6)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.