SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2054 (COMPONENT CONNECTOR END VIEWS - (5 OF 5))VEHICLE COMMUNICATIONS INTERFACE MODULE (VCIM) X1 (UE1)
2004 Oldsmobile Bravada AWD

Vehicle Communications Interface Module (VCIM) X1 (UE1)

2004 Oldsmobile Bravada AWDSECTION Vehicle Communications Interface Module (VCIM) X1 (UE1)
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Vehicle Communications Interface Module (VCIM) X1 (UE1) Connector End View
GM1471689Courtesy of GENERAL MOTORS CORP.
Vehicle Communications Interface Module (VCIM) X1 (UE1)

Pin Wire Circuit Function
1 0.5 D-GN 5060 Low Speed GMLAN Serial Data
2 0.35 BN/WH 2517 Keypad Red LED Signal
3 0.35 YE/BK 2516 Keypad Green LED Signal
4-5 - - Not Used
6 0.35 L-GN/BK 2515 Keypad Supply Voltage
7 0.5 BK/WH 451 Ground
8-9 - - Not Used
10 0.5 TN/BK 2500 High Speed GMLAN Serial Data Bus+
11 0.35 D-GN/WH 2514 Keypad Signal
12 0.5 TN 2501 High Speed GMLAN Serial Data Bus-
13 0.35 GY/BK 5167 Battery Backup Low Reference
14 0.35 RD/WH 5235 Battery Backup Supply Voltage
15 0.5 RD/WH 2540 Battery Positive Voltage
16 - - Not Used
Connector Part Information 
  • OEM: 15431362
  • Service: 15306351
  • Description: 16-Way F Micro64 Unsealed (WH)
Terminal Part Information 
  • Pins: 1-3, 6-7, 10-15
  • Terminal/Tray: 15445905/23
  • Core/Insulation Crimp: Pins 1-3, 6-7, 10-15 - J/J
  • Core/Insulation Crimp: Pins 7 - See Terminal Repair Kit
  • Release Tool/Test Probe: 12180559/J-35616-16 (L-GN)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.