SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2053 (COMPONENT CONNECTOR END VIEWS - (4 OF 5))MULTIFUNCTION SWITCH - I/P
2004 Oldsmobile Bravada AWD

Multifunction Switch - I/P

2004 Oldsmobile Bravada AWDSECTION Multifunction Switch - I/P
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Multifunction Switch - I/P Connector End View
GM850856Courtesy of GENERAL MOTORS CORP.
Multifunction Switch - I/P

Pin Wire Circuit Function
1 0.35 PU/WH 1491 LED Dimming Signal/LED Dimming Supply
2 0.5 RD/WH 1940 Battery Positive Voltage
3 0.35 YE 1491 Backlight Lamps Control
4 - - Not Used
5 0.35 L-BU 1788 Traction Control Switch Signal
6 - - Not Used
7 0.35 TN 2144 Hazard Switch Signal
8 0.35 YE 18 Left Rear Stop/Turn Lamp Supply Voltage
9 0.35 PK 139 Ignition 1 Voltage
10 0.35 YE 749 Security Indicator Control
11 0.35 BN 4 Accessory Voltage
12 0.35 D-GN 2308 Passenger Air Bag Off Indicator Control
13 0.35 D-BU 2307 Passenger Air Bag On Indicator Control
14 0.35 PU 5234 Passenger Seat Belt Indicator
15 0.35 GY 391 Rear Window Wiper Switch Signal
16 0.35 BK 350 Ground
Connector Part Information 
  • OEM: 15394150
  • Service: 15394150
  • Description: 16-Way F Micro-Pack 064 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 15359541/4
  • Core/Insulation Crimp: M/M
  • Release Tool/Test Probe: 15381651-2/J-35616-64B (L-BU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.