SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2052 (COMPONENT CONNECTOR END VIEWS - (3 OF 5))HEATED SEAT CONTROL MODULE - PASSENGER (KA1)
2004 Oldsmobile Bravada AWD

Heated Seat Control Module - Passenger (KA1)

2004 Oldsmobile Bravada AWDSECTION Heated Seat Control Module - Passenger (KA1)
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Heated Seat Control Module - Passenger (KA1) Connector End View
GM1962072Courtesy of GENERAL MOTORS CORP.
Heated Seat Control Module - Passenger (KA1)

Pin Wire Circuit Function
1 0.35 YE 2434 Heated Seat Element - Passenger Cushion Temperature Sensor Signal
2 0.35 L-BU 6180 Passenger Heated Seat Switch Signal
3 1 RD 2479 Heated Seat Cushion Element Control
4 1 RD/WH 640 Battery Positive Voltage
5 1 BK 650 Ground
6 0.35 PK 2435 Low Reference
7 0.35 D-GN 1685 Passenger Heated Seat High Temperature Indicator Control
8 0.35 WH/BK 6185 Passenger Heated Seat Medium Temperature Indicator Control
9 0.35 L-BU 1686 Passenger Heated Seat Low Temperature Indicator Control
10 0.35BN 41 Ignition 3 Voltage
Connector Part Information 
  • OEM: MG651056
  • Service: 88952443
  • Description: 10-Way F 090 II Series (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.