SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2052 (COMPONENT CONNECTOR END VIEWS - (3 OF 5))GENERATOR BATTERY DISCONNECT CONTROL MODULE X2 (HP7)
2004 Oldsmobile Bravada AWD

Generator Battery Disconnect Control Module X2 (HP7)

2004 Oldsmobile Bravada AWDSECTION Generator Battery Disconnect Control Module X2 (HP7)
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Generator Battery Disconnect Control Module X2 (HP7) Connector End View
GM1911014Courtesy of GENERAL MOTORS CORP.
Generator Battery Disconnect Control Module X2 (HP7)

Pin Wire Circuit Function
1 0.5 WH/RD - Link Voltage
2 0.5 RD - Power
3 0.5 TN - Fan Control
4 0.5 BK - Ground
5 0.5 BN - Contactor Low Side PWM
6 0.5 D-BU 2500 High Speed GMLAN Serial Data Bus +
7 0.5 GY 2500 High Speed GMLAN Serial Data Bus +
8 0.5 RD 1540 Battery Positive Voltage
9 0.5 WH/YE - Disconnect Switch Control
10 0.5 RD - Contactor Supply Voltage
11 0.5 OG - Fan Tach Feedback
12 0.5 D-GN 1250 Ground
13 0.5 WH/GN 1250 Ground
14 0.5 WH/BU 2501 High Speed GMLAN Serial Data Bus -
15 0.5 WH/GY 2501 High Speed GMLAN Serial Data Bus -
16 0.5 PU 239 Ignition 1 Voltage
Connector Part Information 
  • OEM: 43025-1600
  • Service: See Catalog
  • Description: 16-Way F Micro-Fit 3.0 Series BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.