SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2051 (COMPONENT CONNECTOR END VIEWS - (2 OF 5))ELECTRONIC BRAKE CONTROL MODULE (EBCM) (- HP5)
2004 Oldsmobile Bravada AWD

Electronic Brake Control Module (EBCM) (- HP5)

2004 Oldsmobile Bravada AWDSECTION Electronic Brake Control Module (EBCM) (- HP5)
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Electronic Brake Control Module (EBCM) (Except HP5) Connector End View
GM1830966Courtesy of GENERAL MOTORS CORP.
Electronic Brake Control Module (EBCM) (- HP5)

Pin Wire Circuit Function
1 3 RD/WH 240 Battery Positive Voltage
2 - - Not Used
3 0.35 D-GN/WH 817 Vehicle Speed Signal (-LAT)
4-7 - - Not Used
8 0.35 L-BU 5986 Serial Data Communication Enable
9-10 - - Not Used
11 0.5 TN/BK 2500 High Speed GMLAN Serial Data Bus+
12 0.5 TN/BK 2500 High Speed GMLAN Serial Data Bus+
13 0.5 TN 2501 High Speed GMLAN Serial Data Bus-
14 0.5 TN 2501 High Speed GMLAN Serial Data Bus-
15 - - Not Used
16 5 BK/WH 51 Ground
17 - - Not Used
18 0.5 TN/WH 6433 CAN Bus High Serial Data
19 0.5 L-GN/BK 6432 CAN Bus Low Serial Data
20-21 - - Not Used
22 0.5 GY 6044 Steering Angle Sensor 5-Volt Reference
23-28 - - Not Used
29 0.5 OG/BK 6045 Steering Angle Sensor Low Reference
30-31 - - Not Used
32 2 RD/WH 840 Battery Positive Voltage
33 0.5 D-GN 872 Right Front Wheel Speed Sensor Signal
34 0.5 GY/WH 7065 Wheel Speed Sensor Supply Voltage Right Front
35 - - Not Used
36 0.5 GY/BK 7127 Wheel Speed Sensor Supply Voltage Left Rear
37 0.5 TN 884 Left Rear Wheel Speed Sensor Signal
38-41 - - Not Used
42 0.5 BN 882 Right Rear Wheel Speed Sensor Signal
43 0.5 GY/BK 7128 Wheel Speed Sensor Supply Voltage Right Rear
44 - - Not Used
45 0.5 GY/WH 7064 Wheel Speed Sensor Supply Voltage Left Front
46 0.5 L-BU 830 Left Front Wheel Speed Sensor Signal
47 - - Not Used
Connector Part Information 
  • OEM: 13547678
  • Service: 19115598
  • Description: 47-Way F MK25 Series Sealed (BK)
Terminal Part Information 
  • Pins: 1, 16
  • Terminal/Tray: 7116-4142-02/10
  • Core/Insulation Crimp: Pins 1 - A/3
  • Core/Insulation Crimp: Pins 16 - D/3
  • Release Tool/Test Probe: 12094430/J-35616-42 (RD)
  • Pins: 3, 8, 11-14, 18-19, 22, 29, 33-34, 36-37, 42-43, 45-46
  • Terminal/Tray: 638551-1/16
  • Core/Insulation Crimp: Pins 3, 8 - J/J
  • Core/Insulation Crimp: Pins 11-14, 18-19, 22, 29, 33-34, 36-37, 42-43, 45- 46 - K/K
  • Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)
  • Pins: 32
  • Terminal/Tray: 7116-4142-02/10
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: 12094430/J-35616-42 (RD)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.