SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2050 (COMPONENT CONNECTOR END VIEWS & INDEX - (1 OF 5))COMPONENT CONNECTOR END VIEWSBODY CONTROL MODULE (BCM) X6
2004 Oldsmobile Bravada AWD

Body Control Module (BCM) X6

2004 Oldsmobile Bravada AWDSECTION Body Control Module (BCM) X6
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) X6 Connector End View
GM1664502Courtesy of GENERAL MOTORS CORP.
Body Control Module (BCM) X6

Pin Wire Circuit Function
1 0.8 GY/BK 690 Courtesy Lamp Supply Voltage
2 0.8 L-GN 24 Backup Lamp Supply Voltage
3 0.35 BN/WH 230 I/P Lamps Dimming Control (UG1)
4-7 - - Not Used
8 0.35 TN/WH 746 Right Front Door Ajar Switch Signal
9 - - Not Used
10 0.35 GY/BK 745 Left Front Door Ajar Switch Signal
11 - - Not Used
12 0.35 PK/BK 1303 Liftgate Ajar Switch Signal
13-14 - - Not Used
15 0.35 D-GN 6127 Liftgate Unlatch Switch Signal
16-19 - - Not Used
20 0.35 PU 1124 Door Lock Key Switch Unlock Signal
21 0.35 YE 1491 Backlight Lamps Control
22 0.35 L-GN 1123 Door Lock Key Switch Lock Signal
23-25 - - Not Used
Connector Part Information 
  • OEM: 15482793
  • Service: 88988842
  • Description: 25-Way F HIT Series (PK)
Terminal Part Information 
  • Pins: 1-3
  • Terminal/Tray: SNAC-A061T-M2.8/20
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: 8, 10, 12, 15, 20-22
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.