SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2050 (COMPONENT CONNECTOR END VIEWS & INDEX - (1 OF 5))COMPONENT CONNECTOR END VIEWSBODY CONTROL MODULE (BCM) X4
2004 Oldsmobile Bravada AWD

Body Control Module (BCM) X4

2004 Oldsmobile Bravada AWDSECTION Body Control Module (BCM) X4
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) X4 Connector End View
GM1664499Courtesy of GENERAL MOTORS CORP.
Body Control Module (BCM) X4

Pin Wire Circuit Function
1 0.8 RD/WH 1240 Battery Positive Voltage
2 0.8 RD/WH 1440 Battery Positive Voltage
3 0.8 RD/WH 1540 Battery Positive Voltage
4 0.8 RD/WH 1340 Battery Positive Voltage
5 0.8 D-BU/WH 1315 Right Front Turn Signal Lamp Supply Voltage
6 0.35 BN 6132 Local Interconnect Network 1 (RCM)
7 0.5 YE 196 Windshield Wiper Motor Park Switch Signal
8 - - Not Used
9 0.5 BK/WH 251 Ground
9 0.5 BK 650 Ground (HP5)
10 0.5 RD/WH 540 Battery Positive Voltage
11 0.35 D-GN/WH 1317 Fog Lamp Relay Control (T37/T96)
12 0.35 YE 5187 Right Trailer Turn Signal Lamp (V92)
13 0.35 OG 5186 Left Trailer Turn Signal Lamp (V92)
14 0.35 L-GN 482 Windshield Outside Moisture Sensor Signal 2 (CE1)
15 0.35 OG 2268 Windshield Washer Relay Control
16 0.35 TN/WH 1969 Headlamp High Beam Relay Control
17 0.35 YE 5530 Hood Open Switch Signal
18 0.35 TN 481 Windshield Outside Moisture Sensor Signal 1 (CE1)
19 0.35 D-BU 5985 Accessory Wakeup Serial Data
20 - - Not Used
21 0.35 YE 5199 Run/Crank Relay Coil Control
22 0.35 L-BU 1344 Trunk Release Relay Control
23 0.35 L-GN/BK 592 DRL Relay Control
24-25 - - Not Used
Connector Part Information 
  • OEM: 15482792
  • Service: 88988841
  • Description: 25-Way F HIT Series (BK)
Terminal Part Information 
  • Pins: 1-5
  • Terminal/Tray: SNAC-A061T-M2.8/20
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: 7, 9, 10-19, 21-23
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.