Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2000 (AUTOMATIC TRANSMISSION - 4T45-E - INTRODUCTION)SPECIFICATIONSEND PLAY SPECIFICATIONS
2004 Oldsmobile Bravada AWD
End Play Specifications
2004 Oldsmobile Bravada AWDSECTION End Play Specifications
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
End Play Specifications (Selective Washer Table)
| Recorded Measurement | Washer Selection | Washer Dimension |
|---|---|---|
| 100.40-100.70 mm (3.952-3.964 in) |
Brown | 1.50-1.60 mm (0.059-0.062 in) |
| 100.71-100.99 mm (3.965-3.975 in) |
Grey | 1.80-1.90 mm (0.070-0.075 in) |
| 101.00-101.29 mm (3.976-3.987 in) |
Natural | 2.09-2.19 mm (0.082-0.086 in) |
| 101.30-101.59 mm (3.988-3.999 in) |
Black | 2.39-2.49 mm (0.094-0.098 in) |
| 101.60-101.88 mm (4.00-4.011 in) |
Orange | 2.68-2.78 mm (0.105-0.109 in) |
| 101.89-102.18 mm (4.012-4.022 in) |
Violet | 2.98-3.08 mm (0.117-0.121 in) |
| 102.19-102.48 mm (4.023-4.034 in) |
Yellow | 3.28-3.38 mm (0.129-0.133 in) |
| 102.49-102.77 mm (4.035-4.046 in) |
Red | 3.57-3.67 mm (0.140-0.144 in) |
| 102.78-103.07 mm (4.047-4.058 in) |
Green | 3.87-3.97 mm (0.152-0.156 in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.