Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Right Transfer Case, Input and Output Drive Shaft Removal
2004 Oldsmobile Bravada AWDSECTION Right Transfer Case, Input and Output Drive Shaft Removal
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Right Transfer Case, Input and Output Drive Shaft Removal
| Callout | Component Name |
|---|---|
| 1 | Transfer Case Half Bolts (Qty: 12) |
| 2 | Transfer Case - Right |
| 3 | Transfer Case Seal |
| 4 | Transfer Case Input Shaft |
| 5 | Transfer Case Rear Output Drive Shaft |
| 6 | Transfer Case Half Locating Pins (Qty: 2) Tip:
Refer to Transfer Case Cleaning and Inspection . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.