Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1992 (AUTOMATIC TRANSMISSION - 6T75 - INTRODUCTION)COMPONENT LOCATORDISASSEMBLED VIEWS
2004 Oldsmobile Bravada AWD
Disassembled Views
2004 Oldsmobile Bravada AWDSECTION Disassembled Views
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Control Valve Body Cover Assembly |
| 2 | Transmission Fluid Level Indicator Assembly |
| 3 | Fluid Level Indicator Tube - Model Dependent |
| 4 | Fluid Level Indicator Tube Seal - Model Dependent |
| 5 | Control Valve Body Cover Assembly Gasket |
| 6 | Control Valve Body Cover Stud |
| 7 | Control Valve Body Cover Bolt |
| 8 | Control Valve Body Bolt |
| 9 | Control Valve Body Bolt |
| 10 | Control Valve Body Cover Wiring Connector Hole Seal |
| 11 | Control Solenoid Valve Spring |
| 12 | Control Valve Body Bolt |
| 13 | Control Valve Body Bolt |
| 14 | Control Valve Body Bolt |
| 15 | Control Solenoid (w/Body and TCM) Valve Assembly |
| 16 | Control Solenoid (w/Body and TCM) Filter Plate Assembly |
| 17 | Manual Shaft Detent Assembly |
| 18 | Control Valve Body Assembly |
| 19 | A/Trans Output Speed Sensor Assembly |
| 20 | A/Trans Output Speed Sensor Bolt |
| 21 | A/Trans Case Assembly |
| 22 | Torque Converter Housing Outer Seal |
| 23 | Front Differential Drive Pinion (w/Transfer Gear) Gear Assembly |
| 24 | Front Differential Drive Pinion Gear Lube Tube |
| 25 | Torque Converter and Support and A/Trans Fluid Pump Housing Assembly |
| 26 | Torque Converter and Differential Housing Bolt |
| 27 | Torque Converter Assembly |
| 28 | Dust Cover Push Pin - Model Dependent |
| 29 | Dust Cover Bolt - Model Dependent |
| 30 | Dust Cover - Model Dependent |
| 31 | Front Differential Carrier Assembly |
| 32 | Input Shaft Thrust Bearing Assembly |
| 33 | A/Trans Case Cover Gasket |
| 34 | A/Trans Case Cover Assembly |
| 35 | A/Trans Case Cover Assembly Bolt |
| Callout | Component Name |
|---|---|
| 51 | A/Trans Case Assembly |
| 52 | Transmission Fluid Cooler Pipe Stud |
| 53 | Transmission Case Cover Locator Pin |
| 54 | A/Trans Fluid Trough O-Ring Seal |
| 55 | A/Trans Fluid Trough Assembly |
| 56 | A/Trans Fluid Trough Bolt |
| 57 | A/Trans Pump Fluid Outlet Seal Assembly |
| 58 | Front Differential Drive Pinion Gear Lube Dam |
| 59 | Front Differential Drive Pinion Gear Bearing Cup |
| 60 | Front Differential Carrier Bearing Cup |
| 61 | Front Wheel Drive Shaft Oil Seal Assembly |
| 62 | A/Trans Fluid Press Test Hole Plug |
| 63 | A/Trans Fluid Level Hole Plug |
| 64 | Control Valve Body Locator Pin |
| 65 | 1-2-3-4 Clutch Fluid Passage Seal |
| Callout | Component Name |
|---|---|
| 201 | A/Trans Fluid Filter Assembly |
| 202 | Filter Neck Seal |
| 203 | A/Trans Fluid Pump Assembly |
| 204 | A/Trans Fluid Pump Bolt |
| 205 | Front Differential Transfer Drive Gear Support Seal Assembly |
| 206 | Front Differential Transfer Drive Gear Support Torque Converter Fluid Seal Assembly |
| 207 | Front Differential Transfer Drive Gear Support Bolt |
| 208 | Front Differential Transfer Drive Gear Support Assembly |
| 209 | Front Differential Transfer Drive Gear Fluid Passage Tube Assembly |
| 210 | Front Differential Transfer Drive Gear Fluid Passage Tube Bolt |
| 211 | Front Differential Transfer Drive Gear Fluid Passage Tube Bolt |
| 212 | Front Differential Transfer Drive Gear Support Fluid Passage Tube Gasket |
| 213 | Front Differential Transfer Drive Gear Support Seal |
| 214 | Drive Sprocket Thrust Washer |
| 215 | Oil Pump Drive Link Driven Sprocket |
| 216 | Oil Pump Drive Link Drive Sprocket |
| 217 | Drive Link |
| 218 | Drive Link Assembly |
| 219 | Drive Sprocket Thrust Washer |
| 220 | Drive Sprocket Thrust Washer |
| 221 | Torque Converter and Differential Housing Assembly |
| 222 | Front Differential Drive Pinion Gear Bearing Cup |
| 223 | Front Differential Drive Pinion Gear Bearing Thrust Washer |
| 224 | Front Differential Drive Pinion Gear Lube Dam |
| 225 | Torque Converter Fluid Seal Assembly |
| 226 | Front Wheel Drive Shaft Oil Seal Assembly |
| 227 | Front Differential Bearing Thrust Washer |
| 228 | Front Differential Carrier Bearing Cup |
| 229 | Front Differential Carrier Baffle |
| 230 | Front Differential Carrier Baffle Bolt |
| Callout | Component Name |
|---|---|
| 301 | Control Valve Channel Upper Plate Assembly |
| 302 | Control Valve Body Bolt |
| 303 | Control Valve Body Bolt |
| 304 | Control Valve Channel Plate |
| 305 | Control Valve Body Bolt |
| 306 | Actuator Feed Accumulator Piston |
| 307 | Actuator Feed Accumulator Spring |
| 308 | Control Valve Body Locator Pin |
| 309 | Control Valve Upper Body Spacer Plate Assembly |
| 310 | Control Valve Body Spacer Plate Retainer |
| 311 | Control Valve Body Ball Check Valve |
| 312 | Control Valve Upper Body Assembly |
| 313 | Control Valve Lower Body Spacer Plate Assembly |
| 314 | Control Valve Lower Body |
| Callout | Component Name |
|---|---|
| 325 | Low and Reverse and 4-5-6 Clutch Regulator Valve Spring |
| 326 | Low and Reverse and 4-5-6 Clutch Regulator Valve |
| 327 | Pressure Regulator Valve Bore Plug |
| 328 | Torque Converter Clutch Valve Spring Retainer |
| 329 | Torque Converter Clutch Regulator Apply Valve Spring |
| 330 | Torque Converter Clutch Regulator Apply Valve |
| 331 | Torque Converter Clutch Regulator Apply Shuttle Valve |
| 332 | 2-6 Clutch Regulator Valve Spring |
| 333 | 2-6 Clutch Regulator Valve |
| 334 | 2-6 Clutch Regulator Valve Gain Valve |
| 335 | 3-5-Reverse Clutch Regulator Valve Spring |
| 336 | 3-5-Reverse Clutch Regulator Valve |
| 337 | Pressure Regulator Valve |
| 338 | Pressure Regulator Valve Spring |
| 339 | Pressure Regulator Valve Bore Plug Retainer |
| 340 | Isolator Valve |
| 341 | Isolator Valve Spring |
| 342 | Torque Converter Clutch Control Valve |
| 343 | Torque Converter Clutch Control Valve Spring |
| 344 | Clutch Select Solenoid Valve #3 Spring |
| 345 | Clutch Select Solenoid #3 Valve |
| 346 | Clutch Select Solenoid Valve #2 Spring |
| 347 | Clutch Select Solenoid #2 Valve |
| 348 | Manual Valve |
| 349 | Control Valve Upper Body |
| Callout | Component Name |
|---|---|
| 327 | 1-2-3-4 Clutch Regulator Valve Bore Plug |
| 339 | Actuator Feed Limit Valve Spring Retainer |
| 360 | 4-5-6 Clutch Boost Valve |
| 361 | 4-5-6 Clutch Boost Valve Spring |
| 362 | Actuator Feed Limit Valve |
| 363 | Actuator Feed Limit Valve Spring |
| 364 | 3-5-Reverse Clutch Boost Valve |
| 365 | 3-5-Reverse Clutch Boost Valve Spring |
| 366 | 4-5-6 Clutch Accumulator Piston |
| 367 | 4-5-6 Clutch Accumulator Piston Spring |
| 368 | 4-5-6 Clutch Accumulator Piston Retainer |
| 369 | 1-2-3-4 Clutch Boost Valve |
| 370 | 1-2-3-4 Clutch Boost Valve Spring |
| 371 | 1-2-3-4 Clutch Regulator Valve Spring |
| 372 | 1-2-3-4 Clutch Regulator Valve |
| 373 | Default Override 1-2-3-4 Clutch Valve |
| 374 | Control Valve Lower Body |
| Callout | Component Name |
|---|---|
| 400 | A/Trans Input Speed Sensor Assembly |
| 401 | A/Trans Input Speed Sensor Bolt |
| 402 | ISS O-Ring Seal |
| 403 | A/Trans Case Cover Assembly |
| 404 | 3-5-Reverse and 4-5-6 Clutch Fluid Seal Ring |
| 405 | 2-6 Clutch Piston |
| 406 | 2-6 Clutch Spring Assembly |
| 407 | 2-6 Clutch Spring Retainer Ring |
| 408 | Low and Reverse Clutch Piston Assembly |
| 409 | Low and Reverse Clutch Spring |
| 410 | Low and Reverse Clutch Spring Retainer Ring |
| Callout | Component Name |
|---|---|
| 415 | A/Trans Input Shaft Speed Sensor Reluctor Ring Retainer Ring |
| 416 | A/Trans Input Shaft Speed Sensor Reluctor Wheel |
| 417 | 3-5-Reverse Clutch Piston |
| 418 | 3-5-Reverse Clutch Spring |
| 419 | 3-5-Reverse Clutch Piston Inner Seal |
| 420 | 3-5-Reverse Clutch Piston Inner Seal |
| 421 | 3-5-Reverse Clutch Piston Dam Seal |
| 422 | 3-5-Reverse and 4-5-6 Clutch Housing Assembly |
| 423 | 3-5-Reverse Clutch (Waved) Plate |
| 424 | 3-5-Reverse Clutch Plate |
| 425 | 3-5-Reverse Clutch (w/Friction Material) Plate Assembly |
| 426 | 3-5-Reverse Clutch Backing Plate |
| 427 | 3-5-Reverse Clutch Backing Plate Retainer Ring |
| Callout | Component Name |
|---|---|
| 422 | 3-5-Reverse and 4-5-6 Clutch Housing Assembly |
| 430 | 4-5-6 Clutch Piston Inner Seal |
| 431 | 4-5-6 Clutch Piston Outer Seal |
| 432 | 4-5-6 Clutch Piston Outer Seal |
| 433 | 4-5-6 Clutch Piston |
| 434 | 4-5-6 Clutch Spring |
| 435 | 4-5-6 Clutch Piston Fluid Dam |
| 436 | 4-5-6 Clutch Dam Retainer Ring |
| 437 | 4-5-6 Clutch Hub Thrust Bearing Assembly |
| 438 | Reaction Carrier Hub Assembly |
| 439 | 4-5-6 Clutch Wave Plate |
| 440 | 4-5-6 Clutch (w/Friction Material) Plate Assembly |
| 441 | 4-5-6 Clutch Backing Plate |
| 442 | 4-5-6 Clutch Backing Plate Retainer Ring |
| Callout | Component Name |
|---|---|
| 445 | 2-6 Clutch Cushion Spring |
| 446 | 2-6 Clutch Plate |
| 447 | 2-6 Clutch (w/Friction Material) Plate Assembly |
| 448 | 2-6 Clutch Backing Plate |
| 449 | Low and Reverse Clutch Apply Plate |
| 450 | Low and Reverse Clutch Cushion (Waved) Spring |
| 451 | Low and Reverse Clutch (w/Friction Material) Plate Assembly |
| 452 | Low and Reverse Clutch Plate |
| 453 | Low and Reverse Clutch Backing Plate |
| 454 | Low and Reverse Clutch Retainer Ring |
| 455 | Low and Reverse Clutch Assembly (OWC) |
| 456 | 1-2-3-4 Clutch (w/Friction Material) Plate Assembly |
| 457 | 1-2-3-4 Clutch Plate |
| 458 | 1-2-3-4 Clutch (Waved) Plate |
| 459 | 1-2-3-4 Clutch Spring Retainer Ring |
| 460 | 1-2-3-4 Clutch Spring |
| 461 | 1-2-3-4 Clutch Piston |
| 449 | Low and Reverse Clutch Apply Plate |
| Callout | Component Name |
|---|---|
| 465 | 2-6 Clutch Hub Thrust Bearing |
| 466 | Reaction Sun Gear Assembly |
| 467 | Reaction (w/Input Internal Gear) Carrier Assembly |
| 468 | Input Carrier Thrust Bearing Assembly |
| 469 | Input Sun Gear Thrust Bearing Assembly |
| 470 | Input (w/Output Internal Gear) Carrier Assembly |
| 471 | Input Sun Gear |
| 472 | Output Carrier Thrust Bearing Assembly |
| 473 | Output Carrier Thrust Bearing Assembly |
| 474 | Output Carrier Assembly |
| 475 | Output Sun Gear Assembly |
| 476 | Front Differential Transfer Drive Gear Input Hub Bearing Assembly |
| 477 | Output Carrier Transfer Drive Gear Hub Assembly |
| Callout | Component Name |
|---|---|
| 480 | Front Differential Drive Pinion Gear Bearing Assembly |
| 481 | Front Differential Drive Pinion (w/Transfer Gear) Gear Assembly |
| Callout | Component Name |
|---|---|
| 485 | Front Differential Carrier Bearing Assembly |
| 486 | Front Differential Carrier Assembly |
| 487 | Front Differential Carrier Bearing Assembly |
| 488 | Front Differential Carrier Thrust Washer |
| 489 | Front Differential Pinion Gear |
| 490 | Front Differential Pinion Gear Shaft Retainer |
| 491 | Front Differential Pinion Gear Shaft |
| 492 | Front Differential Side Gear Thrust Washer |
| 493 | Front Differential Side Gear |
| Callout | Component Name |
|---|---|
| 500 | Park Pawl Actuator Bracket Bolt |
| 501 | Park Pawl Actuator Bracket |
| 502 | Park Pawl Shaft |
| 503 | Park Pawl |
| 504 | Park Pawl Spring |
| 505 | Park Pawl Actuator Guide Pin |
| 506 | Park Pawl Actuator Guide |
| 507 | A/Trans Case Assembly |
| 508 | Manual Shift Shaft Seal |
| 509 | Park Pawl Actuator Assembly |
| 510 | Manual Shift Shaft Pin |
| 511 | Manual Shift Detent (w/Shaft Position Switch) Lever Assembly |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.