SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1991 (AUTOMATIC TRANSMISSION - 2MT70 - INTRODUCTION)SPECIFICATIONSFLUID PUMP SELECTIVE SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Fluid Pump Selective Specifications

2004 Oldsmobile Bravada AWDSECTION Fluid Pump Selective Specifications
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fluid Main Pump Selective Specifications

Fluid Pump Body Pocket Depth Fluid Pump Gear Thickness Endface Clearance
Metric English Metric English Metric English
10.064-10.056 mm 0.3962-0.3959 in 10.029-10.019 mm 0.3948-0.3944 in 0.045-0.029 mm 0.0017-0.0011 in
10.055-10.045 mm 0.3958-0.3954 in 10.018-10.008 mm 0.3944-0.3940 in 0.047-0.027 mm 0.0018-0.0010 in
10.044-10.036 mm 0.3954-0.3951 in 10.007-9.997 mm 0.3939-0.3935 in 0.045-0.029 mm 0.0017-0.0011 in
Fluid Auxiliary Pump Selective Specifications

Fluid Pump Body Pocket Depth Fluid Pump Gear Thickness Endface Clearance
Metric English Metric English Metric English
16.027-16.017 mm 0.6309-0.6305 in 15.997-15.987 mm 0.6298-0.6294 in 0.040-0.020 mm 0.0017-0.0011 in
16.016-16.006 mm 0.6305-0.6301 in 15.986-15.976 mm 0.6293-0.6289 in 0.040-0.020 mm 0.0018-0.0010 in
16.005-15.995 mm 0.6301-0.6297 in 15.975-15.965 mm 0.6289-0.6285 in 0.040-0.020 mm 0.0017-0.0011 in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.