SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 199 (ENGINE CONTROLS - SERVICE & ADJUSTMENT SPECIFICATIONS - 4.8L)QUICK-SERVICESERVICE INTERVALS & SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Service Intervals & Specifications

2004 Oldsmobile Bravada AWDSECTION Service Intervals & Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Yukon, 2003 GMC Sierra, 2003 GMC Savana, 2003 Chevrolet Tahoe, and 2003 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
REPLACEMENT INTERVALS

Component Interval (Miles)
Chevy Express & Savana
Accessory Drive Belt (1) 60,000
Air Filter 30,000
Automatic Transmission Fluid & Filter (2)
Engine Coolant 150,000
Fuel Filter 30,000
Oil & Oil Filter (3)
Spark Plugs 100,000
Sierra, Silverado, Tahoe & Yukon
Accessory Drive Belt (1) 60,000
Air Filter 30,000
Automatic Transfer Case Fluid 50,000
Automatic Transmission Fluid & Filter (2)
Engine Coolant 150,000
Fuel Filter 30,000
Manual Transmission Fluid 150,000
Oil & Oil Filter (3)
PCV 100,000
Spark Plugs 100,000
(1) Inspect and replace as necessary.
(2) If vehicle's GVWR is greater than 8600 lbs (3900 kg) or is used under severe conditions, replace every 50,000 miles. If used under normal conditions, replace every 100,000 miles.
(3) If used under severe conditions, replace every 3000 miles. If used under normal conditions, replace as indicated by CHANGE OIL SOON light or every 12 months, whichever comes first.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.