Adjust Link Replacement

2004 Oldsmobile Bravada AWDSECTION Adjust Link Replacement
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Adjustment Link
GM1828479Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the rear wheel and tire assembly. Refer to Tire and Wheel Removal and Installation .
1 Adjustment Link to Knuckle Bolt and Nut
CAUTION: Refer to Fastener Caution .

Tighten:  160 N.m (118 lb ft).

2 Adjustment Link to Support Bolt and Nut

Tighten:  160 N.m (118 lb ft).

3 Adjustment Link
Procedure: 
Check rear alignment. Refer to Wheel Alignment Measurement .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.