SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 195 (ENGINE CONTROLS - SERVICE & ADJUSTMENT SPECIFICATIONS - 5.3L)CAPACITIES
2004 Oldsmobile Bravada AWD

Section 195 (Engine Controls - Service & Adjustment Specifications - 5.3L): Capacities

2004 Oldsmobile Bravada AWDSECTION Capacities
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 GMC Savana, 2003 GMC Envoy XL, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
FLUID CAPACITY (CRANKCASE) (1)

Application (2) Quantity Qts. (L)
All Models 6.0 (5.7)
(1) Fluid capacities listed are approximate. Always fill to FULL mark.
(2) Includes oil filter capacity.
FLUID CAPACITY (COOLING SYSTEM) (1)

Application (2) Quantity Qts. (L)
Avalanche, Envoy XL, Escalade, Suburban, Tahoe, Yukon & Yukon XL
With Front A/C 14.4 (13.7)
With Front & Rear A/C 15.8 (15.0)
Chevy Express & Savana 13.4 (12.7)
Sierra & Silverado
With Front A/C 14.9 (14.1)
With Front & Rear A/C 15.8 (15.0)
Without A/C 13.4 (12.7)
(1) Fluid capacities listed are approximate. Always fill to FULL mark.
(2) Includes heater.
FLUID CAPACITY (AUTOMATIC TRANSMISSION) (1)

Application (2) Quantity Qts. (L)
4L60-E 5.0 (4.7)
4L80-E 7.7 (7.3)
(1) Fluid capacities listed are approximate. Always fill to FULL mark with Dexron-III, unless specified otherwise.
(2) Drain and refill capacity only. Does not include torque converter, unless specified otherwise.
FLUID CAPACITY (MANUAL TRANSMISSION) (1)

Application Quantity Pts. (L)
Sierra & Silverado
NV3500 (2) 4.8 (2.3)
NV4500 (3) 8.0 (3.8)
ZF S6-650 (4) 12.6 (6.0)
(1) Fluid capacities listed are approximate. Always fill to FULL mark.
(2) Synchromesh Transmission Fluid (GM 12345349).
(3) SAE 75W-85 GL4 Synthetic Lubricant (GM 12346190).
(4) TranSynd™ Synthetic ATF (GM 12378515).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.