Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1946 (SEAT BELT SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
|
IMPORTANT:
Apply Permatex® 24200 or equivalent on all seat belt fasteners prior to installation.
|
||
| Center Rear Seat Belt Retractor Cover-to-Seat Bolt | 20 N.m | 15 lb ft |
| Center Rear Seat Belt Retractor-to-Seat Bolt | 45 N.m | 33 lb ft |
| Center Rear Seat Buckle-to-Seat Bolt | 50 N.m | 37 lb ft |
| Child Seat Tether Anchor Bolt-to-Seat | 25 N.m | 18 lb ft |
| Front Seat Belt Buckle-to-Seat Bolt | 45 N.m | 33 lb ft |
| Front Seat Belt Buckle Quick Connect-to-Seat Bolt | 50 N.m | 37 lb ft |
| Front Seat Belt Height Adjuster-to-Pillar | 40 N.m | 30 lb ft |
| Front Seat Belt Retractor-to-Center Pillar Bolt | 45 N.m | 33 lb ft |
| Front Seat Side Trim Screws | 2.5 N.m | 22 lb in |
| Rear Seat Belt Retractor-to-Center Pillar Bolt | 45 N.m | 33 lb ft |
| Rear Seat Belt-to-Floor Bolt | 45 N.m | 33 lb ft |
| Rear Seat Belt Upper Guide-to-Pillar Bolt | 45 N.m | 33 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.