Air Conditioning and Heater Module Assembly Replacement

2004 Oldsmobile Bravada AWDSECTION Air Conditioning and Heater Module Assembly Replacement
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: HVAC Module Assembly
GM1869901Courtesy of GENERAL MOTORS CORP.
Callout Component Name
CAUTION: To avoid damage to the vehicle and/or the components of the instrument panel because of hidden fasteners and retainers the instrument panel must be removed from the vehicle as an assembly.
Preliminary Procedure: Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement .
1 HVAC Module Nut (Qty: 3)
CAUTION: Refer to Fastener Caution .

Tighten:  8 N.m (71 lb in)

2 HVAC Module Bolt (Qty: 2)

Tighten:  8 N.m (71 lb in)

3 HVAC Module Assembly

Procedure

  1. Note the location and routing of the electrical harness to ensure proper reinstallation.
  2. Disconnect the electrical connections.
  3. When replacing the HVAC module assembly, transfer all necessary components.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.