Front Floor Console Replacement

2004 Oldsmobile Bravada AWDSECTION Front Floor Console Replacement
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Floor Console
GM1868522Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the front floor console trim plate. Refer to Front Floor Console Trim Plate Replacement .
  2. Remove the front floor console front cover replacement. Refer to Front Floor Rear Console Front Cover Replacement .
  3. Remove the front seats. Refer to Front Seat Replacement - Bucket .
1 Front Floor Console Bolt (Qty: 5)
CAUTION: Refer to Fastener Caution .

Tighten:  8 N.m (71 lb in)

2 Front Floor Console Assembly

Procedure

  1. Disconnect the electrical connections.
  2. When replacing the front floor console, transfer all necessary components.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.