Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1927 (INTERIOR TRIM AND PANELING)REPAIR INSTRUCTIONSLIFTGATE TRIM PANEL REPLACEMENT
2004 Oldsmobile Bravada AWD
Liftgate Trim Panel Replacement
2004 Oldsmobile Bravada AWDSECTION Liftgate Trim Panel Replacement
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the liftgate window garnish molding. Refer to Liftgate Garnish Molding Replacement . |
|
| 1 | Liftgate Inside Pull Handle Screw
CAUTION:
Refer to Fastener Caution
.
Tighten: 2 N.m (18 lb in) |
| 2 | Liftgate Trim Finish Panel Screw (Qty: 2) Tighten: 2 N.m (18 lb in) |
| 3 | Liftgate Trim Finish Panel Retainer (Qty: 9) |
| 4 | Liftgate Trim Finish Panel |
| 5 | Liftgate Trim Finish Panel Pull Handle |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.