Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1911 (TRANSFER CASE - MJ8)SPECIFICATIONSTRANSFER CASE MECHANICAL SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Transfer Case Mechanical Specifications
2004 Oldsmobile Bravada AWDSECTION Transfer Case Mechanical Specifications
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Transfer Case Mechanical Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Output Shaft and Input Gear Backlash | 0.06-0.16 mm | 0.0024-0.0063 in |
| Output Shaft Rotating Torque | 1.15-1.71 N.m | 10.2-15.1 lb in |
| Output Shaft/Input Gear Rotating Torque - Measured With the Unit Assembled | 3.20-4.16 N.m | 28.2-34.3 lb in |
| Transfer Case Fill Quantity - Overhaul of Unit | 0.45 Liters | 0.48 quarts |
| Transfer Case Fill Quantity - Replacement of Unit | 0.43 Liters | 0.45 quarts |
| Transmission Type - RPO MJ8 | 5-Speed Automatic | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.