SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1911 (TRANSFER CASE - MJ8)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Cover Bolts 26 N.m 20 lb ft
Drain Plug 44 N.m 33 lb ft
Fill Plug 44 N.m 33 lb ft
Output Shaft/Yoke Locknut - Tighten the Nut Within the Specification Range to Achieve the Proper Output Shaft Rotating Torque 108-294 N.m 75.6-217 lb ft
Output Yoke-to- J 44873  Retaining Bolts 48 N.m 35 lb ft
Propeller Shaft-to-Transfer Case Output Yoke Bolts 25 N.m 19 lb ft
Transfer Case-to-Transmission Bolts 51 N.m 38 lb ft
Ventilation Baffle Bolt 11.8 N.m 104 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.