Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1911 (TRANSFER CASE - MJ8)COMPONENT LOCATORTRANSFER CASE DISASSEMBLED VIEW
2004 Oldsmobile Bravada AWD
Transfer Case Disassembled View
2004 Oldsmobile Bravada AWDSECTION Transfer Case Disassembled View
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 100 | Case |
| 101 | Cover |
| 102 | Bolt |
| 103 | Bolt |
| 104 | Ventilation Baffle |
| 105 | Locating Pin - Transfer Case-to-Transaxle |
| 201 | Output Shaft |
| 202 | Shim - 40 mm |
| 203 | Bearing |
| 204 | Spacer |
| 205 | Race |
| 206 | Race |
| 207 | Bearing |
| 208 | Output Yoke |
| 209 | Washer |
| 210 | Nut |
| 211 | Shim - 80 mm |
| 212 | Race |
| 213 | Bearing |
| 214 | Input Gear |
| 215 | Washer |
| 216 | Shim - 25 mm |
| 217 | Bearing |
| 218 | Race |
| 301 | Seal - Output Shaft |
| 302 | O-Ring |
| 303 | Sealing Washer |
| 304 | O-Ring |
| 305 | Seal - Input Shaft |
| 401 | Fill Plug |
| 402 | Washer |
| 403 | Drain Plug |
| 404 | Washer |
| 406 | Clamp |
| 407 | Ventilation Hose |
| 408 | Ventilation Valve |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.