SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1883 (HYBRID COOLING SYSTEM)REPAIR INSTRUCTIONSGENERATOR CONTROL MODULE COOLANT HOSE REPLACEMENT
2004 Oldsmobile Bravada AWD

Generator Control Module Coolant Hose Replacement

2004 Oldsmobile Bravada AWDSECTION Generator Control Module Coolant Hose Replacement
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Generator Control Module Coolant Hose
GM1759368Courtesy of GENERAL MOTORS CORP.
Generator Control Module Coolant Hose Replacement

Callout Component Name

Preliminary Procedures

  1. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) or Draining and Filling Cooling System (GE 47716 Fill) .
    2. IMPORTANT: This hose is integral to the radiator outlet hose and must replaced as an assembly. Disconnect from the generator control module before raising the vehicle.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
1 Generator Coolant Inlet Hose
Tip:  Using SA9111E  reposition the generator coolant inlet hose clamps.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.