Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Electronic Brake Control Module (EBCM)
2004 Oldsmobile Bravada AWDSECTION Electronic Brake Control Module (EBCM)
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Electronic Brake Control Module (EBCM) Connector Parts Information
Connector Part Information
|
Electronic Brake Control Module (EBCM) Connector Terminal Identification
| Pin | Wire Color | Circuit Number | Function |
|---|---|---|---|
| 1 | BN | 882 | RR WSS Signal |
| 2 | - | - | Not Used |
| 3 | WH | 883 | RR WSS Low Reference |
| 4 | D-GN | 872 | RF WSS Signal |
| 5 | TN | 833 | RF WSS Low Reference |
| 6 | YE | 873 | LF WSS Low Reference |
| 7 | L-BU | 830 | LF WSS Signal |
| 8 | BK | 884 | LR WSS Signal |
| 9 | RD | 885 | LR WSS Low Reference |
| 10 | - | - | Not Used |
| 11 | WH/BK | 5043 | Keyword Serial Data (Except LAT) |
| 12-14 | - | - | Not Used |
| 15 | PK | 1039 | Ignition 1 Voltage |
| 16 | BK | 350 | Ground |
| 17 | RD | 702 | Battery Positive Voltage |
| 18 | OG | 140 | Battery Positive Voltage |
| 19 | BK | 350 | Ground |
| 20-24 | - | - | Not Used |
| 25 | TN | 2501 | CAN Low |
| 26 | - | - | Not Used |
| 27 | TN/WH | 2500 | CAN High |
| 28 | - | - | Not Used |
| 29 | TN | 2501 | CAN Low |
| 30 | TN/WH | 2500 | CAN High |
| 31 | BN/WH | 1571 | Traction Control Switch Signal (NW9) (Except LAT) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.