Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1835 (HYDRAULIC BRAKE SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Delay Valve Bracket Bolts | 10 N.m | 89 lb in |
| Brake Hose-to-Brake Caliper Bolt | 44 N.m | 32 lb ft |
| Brake Master Cylinder Mounting Nuts | 25 N.m | 18 lb ft |
| Brake Pedal Bracket-to-Cross Car Beam Bolt | 25 N.m | 18 lb ft |
| Brake Pipe Fittings at the Brake Delay Valve | 18 N.m | 13 lb ft |
| Brake Pipe Fitting at the Front Brake Hose | 18 N.m | 13 lb ft |
| Brake Pipe Fittings at the Master Cylinder | 18 N.m | 13 lb ft |
| Brake Pipe Fittings at the Proportioning Valve Assembly | 18 N.m | 13 lb ft |
| Brake Pipe Fittings at the Rear Brake Crossover Pipe | 25 N.m | 18 lb ft |
| Brake Pipe Fittings at the Rear Brake Hose | 18 N.m | 13 lb ft |
| Brake Pressure Sensor | 18 N.m | 13 lb ft |
| Front and Rear Brake Hose Bracket Retaining Bolt | 12 N.m | 106 lb in |
| Proportioning Valve-to-Body Bolt | 12 N.m | 106 lb in |
| Proportioning Valve Assembly Bracket Mounting Nut | 25 N.m | 18 lb ft |
| Vacuum Brake Booster Mounting Nuts | 25 N.m | 18 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.