Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1825 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)COMPONENT LOCATORSIR CONNECTOR END VIEWSINFLATABLE RESTRAINT STEERING WHEEL MODULE C2 (INFLATABLE RESTRAINT STEERING WHEEL MODULE)
2004 Oldsmobile Bravada AWD
Inflatable Restraint Steering Wheel Module C2 (Inflatable Restraint Steering Wheel Module)
2004 Oldsmobile Bravada AWDSECTION Inflatable Restraint Steering Wheel Module C2 (Inflatable Restraint Steering Wheel Module)
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint Steering Wheel Module C2 (Inflatable Restraint Steering Wheel Module) Connector End Views
Inflatable Restraint Steering Wheel Module C2 (Inflatable Restraint Steering Wheel Module) Connector Parts Information
Connector Part Information
|
Inflatable Restraint Steering Wheel Module C2 (Inflatable Restraint Steering Wheel Module) Connector Terminal Identification
| Pin | Wire Color | Circuit Number | Function |
|---|---|---|---|
| 1 | WH | 3023 | Steering Wheel Module - Stage 2 - High Control |
| 2 | PK | 3022 | Steering Wheel Module - Stage 2 - Low Control |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.