SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1824 (INSTRUMENT PANEL TRIM AND CONSOLE TRIM)REPAIR INSTRUCTIONSCONSOLE SHIFT LEVER BEZEL REPLACEMENT
2004 Oldsmobile Bravada AWD

Console Shift Lever Bezel Replacement

2004 Oldsmobile Bravada AWDSECTION Console Shift Lever Bezel Replacement
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Console Shift Lever Bezel And Components
GM1641232Courtesy of GENERAL MOTORS CORP.
Console Shift Lever Bezel Replacement

Callout Component Name
1 Console Shift Lever Bezel
NOTE: Be sure to follow the service procedure when removing the trim panel. Failure to follow service procedure may cause damage to the trim panel.

Tip: 
  1. Grasp the forward outer edges of the shift bezel and pull outward and upward carefully releasing the locking tabs.
  2. At the center forward edge of the trim panel squeeze the locking tabs together releasing the forward edge of the trim bezel from the console assembly.
  3. Pull the trim bezel upward releasing the trim bezel from the console assembly.
  4. Disconnect the electrical connections.
  5. If replacing the shift lever bezel, transfer all necessary components.
2 Retainer Clip (Qty: 4)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.