Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fastener Tightening Specifications
2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Accumulator Cover to Case Bolt | 8.0-14.0 N.m | 6-10 lb ft |
| Case Extension to Case Bolt | 42.0-48.0 N.m | 31-35 lb ft |
| Case Extension to Case Bolt (4WD Shipping) | 11.2-22.6 N.m | 8.3-16.7 lb ft |
| Converter Cover Bolt | 10 N.m | 89 lb in |
| Converter Housing to Case Screw | 65.0-75.0 N.m | 48-55 lb ft |
| Cooler Pipe Connector | 35.0-41.0 N.m | 26-30 lb ft |
| Detent Spring to Valve Body Bolt | 20.0-27.0 N.m | 15-20 lb ft |
| Floorshift Control Bolt | 10 N.m | 89 lb in |
| Flywheel to Torque Converter Bolt | 63 N.m | 46 lb ft |
| Forward Accumulator Cover to Valve Body Bolt | 8.0-14.0 N.m | 6-10 lb ft |
| Heat Shield to Transmission Bolt | 17 N.m | 13 lb ft |
| Line Pressure Plug | 8.0-14.0 N.m | 6-10 lb ft |
| Manual Shaft to Inside Detent Lever Nut | 27.0-34.0 N.m | 20-25 lb ft |
| Negative Battery Cable Bolt | 15 N.m | 11 lb ft |
| Oil Level Indicator Bolt | 47 N.m | 35 lb ft |
| Oil Pan to Transmission Case Bolt | 11 N.m | 97 lb in |
| Oil Passage Cover to Case Bolt | 8-14.0 N.m | 6-10 lb ft |
| Park Brake Bracket to Case Bolt | 27.0-34.0 N.m | 20-25 lb ft |
| Park/Neutral Position Switch Screw | 3 N.m | 27 lb in |
| Plate to Case Bolt (Shipping) | 27.0-34.0 N.m | 20-25 lb ft |
| Plate to Converter Bolt (Shipping) | 27.0-34.0 N.m | 20-25 lb ft |
| Pressure Control Solenoid Bracket to Valve Body Bolt | 8.0-14.0 N.m | 6-10 lb ft |
| Pump Assembly to Case Bolt | 26.0-32.0 N.m | 19-24 lb ft |
| Pump Cover to Pump Body Bolt | 20.0-27.0 N.m | 15-20 lb ft |
| Shift Cable Grommet Screw | 1.7 N.m | 15 lb in |
| Shift Control Cable Attachment | 20 N.m | 15 lb ft |
| Speed Sensor Retainer Bolt | 10.5-13.5 N.m | 7.7-10 lb ft |
| TCC Solenoid Assembly to Case Bolt | 8.0-14.0 N.m | 6-10 lb ft |
| Transmission Fluid Pressure Manual Valve Position Switch to Valve Body Bolt | 8.0-14.0 N.m | 6-10 lb ft |
| Transmission Mount to Exhaust Hanger Bracket Bolt | 30 N.m | 22 lb ft |
| Transmission Mount Spacer Bolts | 65 N.m | 48 lb ft |
| Transmission Mount to Transmission Bolt | 65 N.m | 48 lb ft |
| Transmission Mount to Transmission Support Nut | 46 N.m | 35 lb ft |
| Transmission Oil Cooler Pipe Fitting | 35.0-41.0 N.m | 26-30 lb ft |
| Transmission Oil Pan to Case Bolt | 9.5-13.8 N.m | 7-10 lb ft |
| Transmission to Engine Bolt | 47 N.m | 35 lb ft |
| Valve Body to Case Bolt | 8.0-14.0 N.m | 6-10 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.