Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1768 (HYDRAULIC BRAKE SYSTEM)SPECIFICATIONSBRAKE COMPONENT SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Brake Component Specifications
2004 Oldsmobile Bravada AWDSECTION Brake Component Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Brake Component Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Pressure Modulator Bleeder Valves | 9 N.m | 80 lb in |
| Brake Caliper Bleeder Valve, Front | 13 N.m | 115 lb in |
| Brake Caliper Bleeder Valve, Rear | 11 N.m | 97 lb in |
| Brake System Flushing | ||
|
118 ml | 4 oz |
|
235 ml | 8 oz |
| Brake System Pressure Bleed | ||
|
70 kPa | 10 psi |
|
240 kPa | 35 psi |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.