Engine Block - Top/Bottom Views

2004 Oldsmobile Bravada AWDSECTION Engine Block - Top/Bottom Views
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Block - Top/Bottom Views
GM1402164Courtesy of GENERAL MOTORS CORP.
Engine Block - Top/Bottom Views

Hole Thread Size Insert Drill Counterbore Tool Tap Driver Drill Depth - Maximum mm (in) Tap Depth - Maximum mm (in)
J 42385-
1 M8 x 1.25 210 206 207 208 209 22.5 (0.885) 17.5 (0.688)
2 M10 x 1.5 215 211 212 213 214 42.5 (1.67) 37.0 (1.45)
3 M10 x 2.0 104 101 N/A 102 103 31.0 (1.22) 25.5 (1.0)
4 M10 x 2.0 104 101 N/A 102 103 53.5 (2.10) 44.0 (1.73)
5 M8 x 1.25 210 206 207 208 209 26.5 (1.043) 19.0 (0.748)
  • Bolt hole 2 has an 11.5 mm (0.452 in) counterbore included in the 42.5 mm (1.67 in) drill depth. Use sleeve J 42385-311 with the drill and tap.
  • Bolt hole 3 has a 1.5 mm (0.059 in) counterbore included in the 31.0 mm (1.22 in) drill depth. Use sleeve J 42385-316 with the drill and tap.
  • Bolt hole 4 has a 20.5 mm (0.807 in) counterbore included in the 53.5 mm (2.10 in) drill depth.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.