SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1764 (ENGINE MECHANICAL - 4.2L)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD

Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specifications
Metric English
A/C Line Bracket Nut at Oil Level Indicator Tube 7 N.m 61 lb in
A/C Line Bracket Bolt at Engine Lift Bracket 10 N.m 89 lb in
A/C Compressor Bolts 50 N.m 37 lb ft
A.I.R. Cover Stud 25 N.m 18 lb ft
Camshaft Cap Bolt 12 N.m 106 lb in
Camshaft Cover Bolt 10 N.m 89 lb in
Camshaft Position Actuator Valve Bolt 10 N.m 89 lb in
Connecting Rod Cap Bolt
  • First Pass
 25 N.m 18 lb ft
  • Final Pass
 110 degrees
Coolant Temperature Sensor 20 N.m 15 lb ft
Cooling Fan Hub Nut 56 N.m 41 lb ft
Crankshaft Balancer Bolt
  • First Pass
 150 N.m 110.6 lb ft
  • Final Pass
 180 degrees
Crankshaft Main Bearing Cap Bolt
  • First Pass
 25 N.m 18 lb ft
  • Final Pass
 180 degrees
Crankshaft Position Sensor Bolt 10 N.m 89 lb in
Crankshaft Rear Housing Bolt 10 N.m 89 lb in
Cylinder Head Access Hole Plug - Plastic 5 N.m 44 lb in
Cylinder Head Bolt - 14
  • First Pass
 30 N.m 22 lb ft
  • Final Pass
 155 degrees
Cylinder Head End Bolts - 2 Short
  • First Pass
 7 N.m 62 lb in
  • Final Pass
 60 degrees
Cylinder Head End Bolts - 1 Long
  • First Pass
 7 N.m 62 lb in
  • Final Pass
 120 degrees
Cylinder Head Oil Gallery Plug 38 N.m 28 lb ft
Drive Belt Idler Pulley Bolt 50 N.m 37 lb ft
Drive Belt Tensioner Bolt 50 N.m 37 lb ft
Engine Block Oil Gallery Plug - Front and Rear 80 N.m 60 lb ft
Engine Block Oil Gallery Plug - Side 35 N.m 26 lb ft
Engine Flywheel Bolt
  • First Pass
 25 N.m 18 lb ft
  • Final Pass
 50 degrees
Engine Front Cover Bolt 10 N.m 89 lb in
Engine Front Cover Spacer Bolt 10 N.m 89 lb in
Engine Front Lift Bracket Bolt 50 N.m 37 lb ft
Engine Harness Bracket Bolt 10 N.m 89 lb in
Engine Mount Bracket Bolt - Engine 50 N.m 37 lb ft
Engine Mount Bracket Bolt - Frame 110 N.m 81 lb ft
Engine Mount Nuts - Upper and Lower 70 N.m 52 lb ft
Engine Protection Shield Bolts 25 N.m 18 lb ft
EVAP Purge Solenoid Valve Bolt 10 N.m 89 lb in
Exhaust Camshaft Actuator Bolt
  • First Pass
 25 N.m 18 lb ft
  • Final Pass
 135 degrees
Exhaust Camshaft Position Sensor Bolt 10 N.m 89 lb in
Exhaust Manifold Bolt
  • First Pass
 20 N.m 15 lb ft
  • Second Pass
 20 N.m 15 lb ft
  • Final Pass
 20 N.m 15 lb ft
Exhaust Manifold Heat Shield Nut 10 N.m 89 lb in
Exhaust Manifold Heat Shield Stud 10 N.m 89 lb in
Exhaust Pipe Bolt 50 N.m 37 lb ft
Front Differential Bolt 85 N.m 63 lb ft
Fuel Injector Rail Bolt 10 N.m 89 lb in
Generator Battery Lead Nut 9 N.m 80 lb in
Heater Inlet Fitting 45 N.m 33 lb ft
Heater Outlet Fitting 45 N.m 33 lb ft
Ignition Coil Bolt 10 N.m 89 lb in
Intake Camshaft Sprocket Bolt
  • First Pass
 20 N.m 15 lb ft
  • Final Pass
 100 degrees
Intake Manifold Bolt 10 N.m 89 lb in
Knock Sensor 25 N.m 18 lb ft
Oil Filter - PF 58 30 N.m 23 lb ft
Oil Filter Adapter 50 N.m 37 lb ft
Oil Filter Bypass Hole Plug 14 N.m 124 lb in
Oil Level Indicator Tube Stud 10 N.m 89 lb in
Oil Level Sensor Bolt 10 N.m 89 lb in
Oil Pan Bolt - Ends 10 N.m 89 lb in
Oil Pan Bolt - Sides 25 N.m 18 lb ft
Oil Pan Drain Plug 26 N.m 19 lb ft
Oil Pan Nut 25 N.m 18 lb ft
Oil Pan Stud 11 N.m 97 lb in
Oil Pressure Sensor 20 N.m 15 lb ft
Oil Pump Cover Bolt 10 N.m 89 lb in
Oil Pump Pickup Tube 10 N.m 89 lb in
Oil Pump Pressure Relief Valve 14 N.m 124 lb in
Power Steering Pump Bolt 25 N.m 18 lb ft
Power Steering Pump Bracket Bolt 50 N.m 37 lb ft
Spark Plug 18 N.m 13 lb ft
Starter Motor Bolt 50 N.m 37 lb ft
Starter Motor Nut 50 N.m 37 lb ft
Starter Motor Stud 16 N.m 12 lb ft
Thermostat Housing bolt 10 N.m 89 lb in
Throttle Control Module Bolt 10 N.m 89 lb in
Timing Chain Tensioner Bolt 25 N.m 18 lb ft
Timing Chain Tensioner Guide Bolt 12 N.m 107 lb in
Timing Chain Tensioner Shoe Bolt 25 N.m 18 lb ft
Timing Chain Top Guide Bolt 10 N.m 89 lb in
Torque Converter Bolts 60 N.m 44 lb ft
Transmission Bell Housing Bolts 50 N.m 37 lb ft
Transmission Fluid Tube to Air Adapter Nut 10 N.m 89 lb in
Water Outlet Bolt 10 N.m 89 lb in
Water Pump Bolt 10 N.m 89 lb in
Water Pump Pulley Bolt 25 N.m 18 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.