Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1764 (ENGINE MECHANICAL - 4.2L)COMPONENT LOCATORDISASSEMBLED VIEWS
2004 Oldsmobile Bravada AWD
Disassembled Views
2004 Oldsmobile Bravada AWDSECTION Disassembled Views
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 100 | Engine Block |
| 101 | Transmission Locator Pin |
| 102 | Cylinder Head Locator Pin |
| 102 | Cylinder Head Locator Pin |
| 103 | Main Bearing Cap Locator Pin |
| 104 | Engine Front Cover Locator Pin |
| 105 | Cylinder Sleeve |
| 106 | Connecting Rod Bolt |
| 107 | Connecting Rod Cap |
| 108 | Connecting Rod Lower Bearing |
| 109 | Connecting Rod Upper Bearing |
| 110 | Connecting Rod |
| 111 | Connecting Rod Bushing |
| 112 | Piston Pin Retainer |
| 112 | Piston Pin Retainer |
| 113 | Piston Pin |
| 114 | Piston |
| 115 | Oil Control Ring Set |
| 116 | Lower Compression Ring |
| 117 | Upper Compression Ring |
| 118 | Crankshaft |
| 119 | Upper Main Bearings |
| 120 | Main Thrust Bearing |
| 121 | Lower Main Bearing |
| 122 | Main Bearing Cap |
| 123 | Main Bearing Cap Stiffener |
| 124 | Main Bearing Cap Bolt |
| 125 | Flywheel - Automatic Transmission |
| 126 | Flywheel Bolt |
| 127 | Crankshaft Sprocket |
| 128 | Crankshaft Balancer |
| 129 | Crankshaft Balancer Bolt |
| Callout | Component Name |
|---|---|
| 200 | Cylinder Head |
| 201 | Cylinder Head Gasket |
| 202 | Engine Lift Bracket |
| 203 | Engine Lift Bracket Bolts |
| 204 | Intake Valve |
| 205 | Exhaust Valve |
| 206 | Access Hole Plugs |
| 207 | Cylinder Head Bolt |
| 208 | Valve Lash Adjusters |
| 209 | Valve Seals |
| 210 | Valve Springs |
| 211 | Valve Spring Retainers |
| 212 | Valve Keys |
| 213 | Valve Rocker Arms |
| 214 | Cylinder Head Bolt |
| 215 | Spark Plug |
| 216 | A.I.R. Pipe Plug |
| 217 | Water Jacket Plug |
| 218 | Oil Gallery Plug |
| 219 | Oil Gallery Plug |
| 220 | Timing Chain Top Guide |
| 221 | Timing Chain Top Guide Bolt |
| 222 | Intake Camshaft |
| 223 | Exhaust Camshaft |
| 224 | Camshaft Cap Bolts |
| 225 | Camshaft Cap |
| 225 | Camshaft Cap |
| 226 | Exhaust Camshaft Actuator |
| 227 | Exhaust Camshaft Actuator Bolt |
| 228 | Intake Camshaft Sprocket |
| 229 | Intake Camshaft Sprocket Bolt |
| 230 | Timing Chain |
| 231 | Timing Chain Tensioner Shoe |
| 232 | Timing Chain Tensioner Shoe Bolt |
| 233 | Timing Chain Guide |
| 234 | Timing Chain Guide Bolt |
| 235 | Timing Chain Tensioner |
| 236 | Timing Chain Tensioner Bolt |
| Callout | Component Name |
|---|---|
| 300 | Water Pump |
| 301 | Water Pump Pulley |
| 302 | Water Pump Pulley Bolt |
| 303 | Water Pump Gasket |
| 304 | Water Pump Bolt |
| 305 | Thermostat Housing |
| 306 | Thermostat Housing Seal |
| 307 | Thermostat Housing Bolt |
| 308 | Water Outlet |
| 309 | Water Outlet Bolt |
| 310 | Water Outlet Seal |
| 311 | Heater Inlet Hose Fitting |
| 312 | Heater Outlet Hose Fitting |
| 313 | Coolant Temperature Sensor |
| Callout | Component Name |
|---|---|
| 400 | Oil Pan |
| 401 | Oil Pan Bolt |
| 401 | Oil Pan Bolt |
| 402 | Oil Pan Nut |
| 403 | Oil Pan Stud |
| 404 | Oil Drain Plug |
| 405 | Oil Drain Plug Gasket |
| 406 | Oil Pump Pickup Tube |
| 407 | Oil Pump Pickup Tube Bolt |
| 407 | Oil Pump Pickup Tube Bolt |
| 408 | Oil Filter |
| 409 | Oil Filter Adapter |
| 410 | Oil Filter Bypass Valve |
| 411 | Oil Pump |
| 412 | Oil Pump Seal |
| 413 | Oil Pump Bolt |
| 414 | Oil Pressure Relief Valve |
| 415 | Oil Pressure Relief Valve Spring |
| 416 | Oil Pressure Relief Valve Plug |
| 417 | Oil Pump Inner Gear |
| 418 | Oil Pump Outer Gear |
| 419 | Oil Pump Pickup Tube Gasket |
| 420 | Oil Pressure Switch |
| 421 | Camshaft Position Actuator Solenoid Valve |
| 422 | Camshaft Position Actuator Solenoid Valve Bolt |
| 423 | Oil Level Indicator Tube |
| 424 | Oil Level Indicator |
| 425 | Oil Level Indicator Tube Stud |
| 426 | Oil Level Indicator Tube Nut |
| Callout | Component Name |
|---|---|
| 500 | Intake Manifold |
| 501 | Intake Manifold Seal |
| 502 | Intake Manifold Bolt |
| 503 | Positive Crankcase Vent Hose |
| 504 | Throttle Control Module |
| 505 | Throttle Control Module Bolt |
| 506 | Throttle Control Module Seal |
| 507 | Fuel Injector Rail |
| 508 | Fuel Injector Rail Bolt |
| 509 | Crankshaft Rear Oil Seal Housing |
| 510 | Crankshaft Rear Oil Seal Housing Bolt |
| 511 | Crankshaft Rear Oil Seal |
| 512 | Engine Front Cover |
| 513 | Engine Front Cover Bolt |
| 514 | Engine Front Center Cover Bolt |
| 515 | Engine Front Oil Seal |
| 516 | Engine Front Cover Bolt |
| 517 | Engine Front Cover Bolt Spacer |
| 518 | Camshaft Cover |
| 519 | Camshaft Cover Bolt |
| 520 | Camshaft Cover Seal |
| 521 | Oil Fill Cap |
| Callout | Component Name |
|---|---|
| 600 | Exhaust Manifold |
| 601 | Exhaust Manifold Gasket |
| 602 | Exhaust Manifold Bolt |
| 603 | Exhaust Manifold Heat Shield |
| 604 | Exhaust Manifold Heat Shield Stud |
| 605 | Exhaust Manifold Heat Shield Nut |
| 606 | A.I.R. Cover |
| 607 | A.I.R. Cover Gasket |
| 608 | A.I.R. Cover Stud |
| 609 | A.I.R. Cover Nut |
| 700 | Ignition Control Module |
| 701 | Ignition Control Module Spring |
| 702 | Ignition Control Module Boot |
| 703 | Exhaust Camshaft Position Sensor |
| 704 | Exhaust Camshaft Position Sensor Bolt |
| 705 | EVAP Emission Canister Purge Solenoid |
| 706 | EVAP Emission Canister Purge Solenoid Bolt |
| 707 | Knock Sensor |
| 708 | Knock Sensor |
| 709 | Crankshaft Position Sensor |
| 710 | Crankshaft position Sensor Bolt |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.