Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1753 (BODY REAR END)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Bellcrank Screws | 0.675 N.m | 6 lb in |
| Endgate Handle Screws | 2.5 N.m | 22 lb in |
| Endgate Hinge Bolts | 25 N.m | 18 lb ft |
| Endgate Inner Reinforcement Panel Bolts | 25 N.m | 18 lb ft |
| Endgate Left Latch Screws | 10 N.m | 89 lb in |
| Endgate Left Lower Striker Bolts | 50 N.m | 37 lb ft |
| Endgate Left Upper Striker Bolts | 25 N.m | 18 lb ft |
| Endgate License Plate Pocket Nuts | 10 N.m | 89 lb in |
| Endgate Lower Hinge Strap Bolt | 10 N.m | 89 lb in |
| Endgate Prop Rod Bolts | 25 N.m | 18 lb ft |
| Endgate Rear Body Control Module | 2.5 N.m | 22 lb in |
| Endgate Right Upper Latch Bracket Bolts | 25 N.m | 18 lb ft |
| Endgate Right Upper Latch Screws | 12 N.m | 106 lb in |
| Endgate Right Upper Striker Bolts | 30 N.m | 22 lb ft |
| Endgate Support Cable Bolts | 25 N.m | 18 lb ft |
| Endgate Torque Rod Bolts | 25 N.m | 18 lb ft |
| Endgate Upper Hinge Strap Bolt | 10 N.m | 89 lb in |
| Endgate Wedge Screws | 10 N.m | 89 lb in |
| Endgate Window Bolts | 12 N.m | 106 lb in |
| Endgate Window Regulator Motor Bracket Bolt | 10 N.m | 89 lb in |
| Endgate Window Regulator Side Rail Bolts | 25 N.m | 18 lb ft |
| Endgate Window Run Channels | 10 N.m | 89 lb in |
| Endgate Window Up Stop Nut | 25 N.m | 18 lb ft |
| Endgate Wiring Harness Bolt | 10 N.m | 89 lb in |
| License Plate Pocket Screws | 5 N.m | 44 lb in |
| Liftgate Bumper Bolts | 25 N.m | 18 lb ft |
| Liftgate Control Module Screws | 10 N.m | 89 lb in |
| Liftgate Hinge Nuts | 20 N.m | 15 lb ft |
| Liftgate Latch/Lock Assembly Screws | 10 N.m | 89 lb in |
| Liftgate Lock Actuator Screws | 0.75 N.m | 6 lb in |
| Liftgate Striker Bolts | 25 N.m | 18 lb ft |
| Liftgate Window Latch Screws | 10 N.m | 89 lb in |
| Midgate Handle Screws | 2.5 N.m | 22 lb in |
| Midgate Hinge Nuts | 25 N.m | 18 lb ft |
| Midgate Hinge to Body Nuts | 32 N.m | 24 lb ft |
| Midgate Inner Panel Screws | 2.5 N.m | 22 lb in |
| Midgate Latch Screws | 10 N.m | 89 lb in |
| Midgate Outer Panel Nuts | 5 N.m | 44 lb in |
| Midgate Striker Screws | 10 N.m | 89 lb in |
| Midgate Wedge Screws | 10 N.m | 89 lb in |
| Midgate Window Bolts | 5 N.m | 44 lb in |
| Midgate Window Channel Bracket Screws | 10 N.m | 89 lb in |
| Midgate Window Regulator Nuts | 25 N.m | 18 lb ft |
| Midgate Window Run Channel Screws | 10 N.m | 89 lb in |
| Pullstrap Screw | 4 N.m | 35 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.