Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1731 (CAUTIONS AND NOTICES)INTRODUCTIONEMISSION MODIFICATION NOTICE
2004 Oldsmobile Bravada AWD
Emission Modification Notice
2004 Oldsmobile Bravada AWDSECTION Emission Modification Notice
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Modifications made to the following can affect the vehicle's emission controls and may cause the Malfunction Indicator Lamp (MIL), Check Engine or Service Engine Soon lamp to illuminate:
Replacement tires that do not meet the same Tire Performance Criteria (TPC) of the original tires can also affect the vehicle's emission controls. This may also cause the Malfunction Indicator Lamp (MIL), Check Engine or Service Engine Soon lamp to illuminate.
Modifications to these systems or the installation of incorrect TPC tires could lead to repairs that are not covered by the manufacturer's warranty. This may also cause a required Emission Inspection/Maintenance test to fail.
- The engine
- The transmission
- The exhaust
- The fuel system
Replacement tires that do not meet the same Tire Performance Criteria (TPC) of the original tires can also affect the vehicle's emission controls. This may also cause the Malfunction Indicator Lamp (MIL), Check Engine or Service Engine Soon lamp to illuminate.
Modifications to these systems or the installation of incorrect TPC tires could lead to repairs that are not covered by the manufacturer's warranty. This may also cause a required Emission Inspection/Maintenance test to fail.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.