Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1714 (REAR DRIVE AXLE)SPECIFICATIONSREAR AXLE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Rear Axle Specifications
2004 Oldsmobile Bravada AWDSECTION Rear Axle Specifications
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Rear Axle Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Assembly Rolling Torque - without Clutch Lubed Bearings | 1.9-3.5 | 17-31 lb in |
| Gear Ratio, L61 2.2L and L81 3.0L | 2.53 | 2.53 |
| Gear Ratio L66 3.5L | 3.39 | 3.39 |
| Pinion Shaft Preload | 1.69 N.m | 15 lb in |
| Pinion to Ring Gear Backlash | 0.125-0.225 mm | 0.005-0.009 in |
| Rear Differential Fill Quantity | 750 ml | 25.4 oz |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.