Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1714 (REAR DRIVE AXLE)COMPONENT LOCATORREAR AXLE DISASSEMBLED VIEWS
2004 Oldsmobile Bravada AWD
Rear Axle Disassembled Views
2004 Oldsmobile Bravada AWDSECTION Rear Axle Disassembled Views
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Nut |
| 2 | Input Flange |
| 3 | Dust Shield |
| 4 | Oil Seal |
| 5 | Drain Plug |
| 6 | Plug |
| 7 | Bolt |
| 8 | Shield |
| 9 | Bolt |
| 10 | Clutch Cover |
| 11 | Bearing |
| 12 | Snap Ring |
| 13 | Seal |
| 14 | Clutch Drum |
| 15 | Pinion Nut |
| 16 | Bearing |
| 17 | Cup |
| 18 | Seal |
| 19 | Filter |
| 20 | Mount |
| 21 | Axle Seals |
| 22 | Hollow Dowel |
| 23 | Differential Carrier |
| 24 | Cup |
| 25 | Collapsible Spacer |
| 26 | Bearing |
| 27 | Shim |
| 28 | Pinion Gear |
| 29 | Shim |
| 30 | Cup |
| 31 | Differential Carrier Assembly |
| 32 | Cover |
| 33 | Bolt |
| 34 | Fill Plug |
| 35 | Vent |
| 36 | Nut |
| 37 | Bracket |
| 38 | Bolt |
| Callout | Component Name |
|---|---|
| 1 | Bearing |
| 1 | Bearing |
| 2 | Bolt |
| 3 | Pinion Shaft Pin |
| 4 | Differential Case |
| 5 | Pinion Shaft Lock Pin |
| 6 | Ring Gear |
| 7 | Washer |
| 7 | Washer |
| 8 | Axle Side Gear |
| 8 | Axle Side Gear |
| 9 | Washer |
| 9 | Washer |
| 10 | Pinion Gears |
| 10 | Pinion Gears |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.