Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1711 (TRANSFER CASE - NVG 900)SPECIFICATIONSTRANSFER CASE SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Transfer Case Specifications
2004 Oldsmobile Bravada AWDSECTION Transfer Case Specifications
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
General Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Pinion Shaft Rotating Torque | 0.9-1.6 N.m | 8-14 lb in |
| Pinion to Ring Gear Backlash | 0.127-0.178 mm | 0.005-0.007 in |
| System Rolling Torque With Seals | 3.2-4.5 N.m | 28-40 lb in |
| System Rolling Torque Without Seals | 2.8-3.9 N.m | 25-35 lb in |
| Transfer Case Fill Quantity | 500 ml or to the bottom of the fill hole | 17 oz or to the bottom of the fill hole |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.