Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
2004 Oldsmobile Bravada AWDSECTION Removal Procedure
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Install the strut assembly in the J 45400
using the following procedure. See Special Tools .
- Adjust the lower legs of the J 45400 to the lowest possible coil of the spring. See Special Tools .
- Adjust the upper legs of the J 45400 to the highest possible coil of the spring. See Special Tools .
- Inspect the strut assembly to insure hooks on the strut compress legs are properly installed on the spring coils.
- Verify the strut assembly is parallel with the J 45400 . See Special Tools .
- Compress the spring enough to unload the upper strut mount.
- Remove the strut shaft nut.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.