Fastener Tightening Specifications

2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Fuel Filler Door Bolts 2.5 N.m 22 lb in
Lift Gate Applique Nuts 1.5 N.m 13 lb in
Lift Gate Bodyside Strut Anchor Bolts 10 N.m 89 lb in
Lift Gate Crank Bolts 12 N.m 9 lb ft
Lift Gate Handle Bolts 4 N.m 35 lb in
Lift Gate to Hinge Bolts 25 N.m 18 lb ft
Lift Gate Hinge to Body Nuts 25 N.m 18 lb ft
Lift Gate Latch Bolts 12 N.m 9 lb ft
Lift Gate Strut Anchor 25 N.m 18 lb ft
Lift Gate Striker Bolts 25 N.m 18 lb ft
Quarter Panel to Body Bolts 9 N.m 80 lb in
Quarter Panel to Body Nuts 9 N.m 80 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.