Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1688 (ROOF)REPAIR INSTRUCTIONSSUNROOF SWITCH REPLACEMENTINSTALLATION PROCEDURE

2004 Oldsmobile Bravada AWD

Installation Procedure

2004 Oldsmobile Bravada AWDSECTION Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Sunroof Switch & Fasteners

Courtesy of GENERAL MOTORS CORP.

Install sunroof switch with fasteners.
Tighten: Tighten sunroof switch to 2.5 N.m (22 lb in)

Fig 2: Disconnecting/Connecting Electrical Connectors At Reading Lamp Cover/Sunroof Switch

Courtesy of GENERAL MOTORS CORP.

Connect sunroof switch harness to sunroof switch.
Position front reading lamp cover into rear attaching hooks.
Rotate front reading lamp cover into lamp assembly forward, then snap cover into place.
Function sunroof switch to ensure proper operation.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.