Scan Tool Output Controls

2004 Oldsmobile Bravada AWDSECTION Scan Tool Output Controls
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls

Scan Tool Output Control Additional Menu Selection(s) Description
Daytime Running Lamps Light Test The BCM actuates the DRL relay when you select ON. The headlamps should illuminate until commanded OFF.
Horn Relay Miscellaneous Test The BCM actuates the horn relay for 5 seconds when you select ON. The horn should sound for 5 seconds.
Passlock Power Output Control The BCM turns the Passlock power control ON or OFF as commanded by the scan tool.
Security Lamp Miscellaneous Test The BCM actuates the security LED when you select ON. The security LED should illuminate until commanded OFF.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.