Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1670 (ENGINE COOLING)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada AWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Auxiliary Coolant Pump Bolt | 10 N.m | 89 lb in |
| Battery Terminal Bolt | 17 N.m | 13 lb ft |
| Coolant Bridge Bolt - L81 | 30 N.m | 22 lb ft |
| Coolant Pipe Engine Lift Bracket Bolt - L81 | 20 N.m | 15 lb ft |
| Exhaust Manifold Heat Shield Bolts - L61 | 25 N.m | 18 lb ft |
| Thermostat Housing Bolts - L81 | 20 N.m | 15 lb ft |
| Thermostat Housing Cover-to-Thermostat Housing Bolts - L61 | 10 N.m | 89 lb in |
| Thermostat Housing-to-Block Bolts - L61 | 10 N.m | 89 lb in |
| Thermostat Pipe Bracket-to-Cylinder Head Bolt - L61 | 8 N.m | 71 lb in |
| Water Pipe Support Bracket | 10 N.m | 89 lb in |
| Water Pump Access Bolts-to-Front Cover - L61 | 10 N.m | 89 lb in |
| Water Pump Bolts | 25 N.m | 18 lb ft |
| Water Pump Sprocket-to-Water Pump Bolts - L61 | 10 N.m | 89 lb in |
| Wheel Nuts | 125 N.m | 92 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.