Scan Tool Output Controls

2004 Oldsmobile Bravada AWDSECTION Scan Tool Output Controls
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Engine Control Module (ECM) Scan Tool Output Controls

Scan Tool Output Control Additional Menu Selection(s) Description
Fan Control 1 Command General Info Outputs The scan tool displays a Commanded State of On or Off. This allows you to communicate with the ECM and activate or deactivate the cooling fan relay, manually turning the fans On and Off.
Fan Control 2 Command General Info Outputs The scan tool displays a Commanded State of On or Off. This allows you to communicate with the ECM and activate or deactivate the cooling fan relay, manually turning the fans On and Off.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.